EPOLOCK™ 6500 (Ceramic & Metal) – High-Performance Anti-Erosion Epoxy for Industrial Repairs
Advanced Protection Against Wear & Corrosion
EPOLOCK™ 6500 is a ceramic-reinforced, two-component epoxy adhesive designed to rebuild metal surfaces damaged by erosion and corrosion. Comparable to Belzona 1311, it combines metal bonding strength with ceramic wear resistance for long-lasting equipment protection.
Key Benefits
✔ 19.6 MPa Pull-Off Strength (ASTM D4541)
✔ Ceramic-Filled Formula – Extreme abrasion resistance
✔ 98°C Heat Resistance (post-cured)
✔ Chemical Resistant – Withstands 20% acids/alkalis & hydrocarbons
✔ Machinable After Cure – Drill, tap, or grind
Technical Specifications
| Property | Value |
|---|---|
| Mixing Ratio | 6:1 (Resin:Hardener) |
| Working Time | 15-35 min (temp-dependent) |
| Full Cure | 1-10 days (see table below) |
| Density | 2.5-2.8 g/cm³ |
| Shore Hardness | D 88 |
| Shelf Life | 2 years |
Cure Time vs Temperature:
| Temp | Handling | Machining | Full Strength | Fluid Contact |
|---|---|---|---|---|
| 5°C | 10 hrs | 6 hrs | 5 days | 4 days |
| 20°C | 1 hr | 2 hrs | 1 day | 1 day |
Industrial Applications
Critical Equipment Repair
- Pump housings & impellers
- Heat exchanger tubesheets
- Butterfly/gate valve restoration
- Pipe elbows & tees
Protective Coatings
- Erosion-prone metal surfaces
- Corroded structural components
- High-wear bearing housings
Why Choose EPOLOCK 6500?
- Cost-effective alternative to metal replacement
- 500g ready-to-use kits for field repairs
- Post-cure option (2hrs @250°C) for enhanced performance
- Withstands sand slurry, chemical exposure, and thermal cycling
Trusted by: Power plants, oil refineries, and water treatment facilities
📧 Email: info@sherafattradings.com
📱 WhatsApp: +98 903 963 1326